Products
5 ¼” X-Series
The “x” means extra flexible and reflects an extensive operational capability in terms of drilling parameters and well curvature.
With its 5 ¼” OD, this tool provides for greatly improved capabilities in combination with 6 to 7 ½” drill-bits and even larger under-reamers. The tool has a torsional capacity about double that of a 4 ¾” OD tool. The stroke capacity of 10” or 0.25m gives the tool a working range that makes it an optimal solution for high load performance-drilling. Tomax can provide an adequate overshot with the tool for use in 6 and 6 ¼” hole sizes.
The pressure loss through the tool is 150 psi at 350 GPM or 10 bar at 1300 lpm.
Parameter | metric | imperial |
Length | 5.64 m | 18.49 ft |
Max. OD | 133 mm | 5.25” |
Min. ID | 35mm | 1.38” |
Connection top | NC 38 box | NC 38 box |
Connection bottom | NC 38 pin | NC 38 pin |
